Pump station alarm monitoring

---

Prevent sewage spills before they happen

When wastewater pump stations fail or reach critical levels, the consequences can be immediate and severe—environmental damage, costly clean-ups, fines, and business disruption. When a client deploys our DataCell hardware and utilises DataScape, businesses gain a powerful, always-on monitoring solution that detects rising levels early, sends real-time alerts, and helps prevent sewage spills before they occur.

---

How the retrofit works

1. Your existing panel. Single or dual pump controller, pump starter, or a standalone high level alarm — whatever is already on the wall. Most have a volt-free common alarm output intended for BMS or SCADA connection. That is the connection point.

2. The logger. A DataCell logger wires into those terminals and monitors up to four signals per installation. It runs from 230V mains or a low voltage DC supply, and its internal battery backup keeps it reporting through a mains failure — so a power outage sends you an alert instead of going quiet.

3. The network. 4G cellular. No site network, no fixed IP address, no SCADA licence, and nothing for an IT department to approve.

4. The alert. SMS, email, or both, to as many recipients as you need. Every event is timestamped and retained, so you have the history as well as the alarm.

Escalation is configurable — a fault can go to the operator first, then to a supervisor if it is not acknowledged.

---

Real-time visibility into every pump, anytime, anywhere

Warning and fault alarms from controllers and level devices are captured instantly by DataCell in the field. These signals are transmitted directly to the DataScape platform, giving you:

• Live status updates for every pump and site
• Immediate alerts when levels approach the upper level in the vessel
• Complete historical records for compliance and reporting
• 24/7 oversight from your phone, tablet, or desktop
• Fast and simple integration with all brands and types of pump controllers, alarm units and float switches

With DataCell and DataScape, critical information is delivered straight to your fingertips—no matter where your assets are located.

---

What can be monitored

Up to four signals per installation, chosen from:

• High level float or level transducer — wet well and vessel levels
• Pump run and pump fault status
• Thermal overload tripped
• Mains power supply present or failed — still reported during an outage, on battery backup
• Pump run hours and start counts
• Any general volt-free alarm contact
• Analogue inputs where a transducer is fitted

---

Avoid environmental harm with early intervention

A single sewage overflow can contaminate waterways, soil, and ecosystems. But most spills are preventable with timely warnings.

By detecting high-level conditions with a DataCell device early, it allows businesses to:

• Act before pumps fail or overflow
• Deploy appropriate staff or contractors
• Dispatch crews only when necessary
• Protect the surrounding environment
• Maintain regulatory compliance with ease

Preventing one spill doesn't just avoid fines—it safeguards your brand reputation and demonstrates environmental responsibility.

---

Reduce financial risk and operational costs

Sewage spills can be expensive—often dramatically more costly than proactive monitoring.

With DataCell and DataScape, businesses commonly benefit from:

• Avoided fines and regulatory penalties
• Reduced emergency call-out costs
• Lower clean-up and remediation expenses
• Prolonged pump and asset life through early intervention
• Optimised maintenance scheduling

Early warning means lower operating cost. A prevented spill means major financial savings.

---

Strengthen compliance and peace of mind

Local councils and water authorities expect businesses to maintain strict monitoring of wastewater systems. DataScape's transparent reporting and reliable insights make it simple to:

• Demonstrate compliance
• Provide audit-ready data
• Share clear information with regulators
• Maintain trust and avoid enforcement actions

You'll always have the data you need—accurate, verifiable, and accessible.

---

Common questions

Will it work with my brand of pump controller?
Almost certainly. If the panel has a volt-free common alarm output, a float, or a level transducer, we can read it. That covers effectively every controller sold in Australia.

Do I need to replace my panel?
No. That is the point of the retrofit.

Does the site need internet?
No. The logger uses its own 4G connection.

What power does it need?
230V mains or a low voltage DC supply. Internal battery backup keeps it running through an outage, so a mains failure is reported rather than simply going quiet.

How many signals can one logger monitor?
Up to four per installation. Most sites use high level, pump fault, overload and mains power.

Who installs it?
Any licensed electrician, or we can arrange installation.

What about nuisance trips?
Delays and acknowledgement rules mean a brief float bounce doesn't wake anyone. Everything is still logged even when alerts are muted.

---

Protect your business, your community, and the environment

DataCell and DataScape work together to create a smarter, safer wastewater management solution. By monitoring high-level alarms in real time, your business can prevent sewage spills, reduce costs, and operate with confidence.

Cleaner environment. Lower risk. Stronger compliance. Better business outcomes.